29mm New Blue Thunder™ Propellant Grain
Product Code: RCS-29NBTPG-1
29mm New Blue Thunder™ Propellant Grain Summary
New Blue Thunder™ propellant vacuum mixed and cast into P/N 03168-S paper tubing with the following specifications:
O.D.: 0.995"
I.D.: 0.970"
Length: 12.5"
Net propellant weight: 258g approx.
Click here for a full-size propellant data sheet.
May be used with with 29mm EMK293GSUHP and EMK294GSUHP single-use high power Experimental Motor Kits™ (EMKs), also fits in 1.005" I.D. phenolic and fiberglass casings.
Propellant may be cut with a hobby knife and drilled by hand or with non-sparking equipment operating at 500 RPM or less. DO NOT use high speed saws or cutters to machine propellant.
Notice: This product is intended for use in a rocket motor configuration of your own design. RCS Rocket Motor Components (RCS), Inc. products are sold "as-is" and no warranty, suitability or fitness for any particular application, either expressed or implied, is made regarding RCS products. Since we cannot control the storage, transportation and use of our products, once sold we cannot assume any responsibility for product storage, transportation or usage. RCS shall not be held responsible for any personal injury or property damage resulting from the handling, storage or use of its products, including any damage to AeroTech or third-party rocket motor hardware. The buyer assumes all risks and liabilities therefrom and accepts and uses RCS products on these conditions. Note: Your state may provide additional rights not covered by this warranty. For use by certified flyers 18 years of age or older.
O.D.: 0.995"
I.D.: 0.970"
Length: 12.5"
Net propellant weight: 258g approx.
Click here for a full-size propellant data sheet.
May be used with with 29mm EMK293GSUHP and EMK294GSUHP single-use high power Experimental Motor Kits™ (EMKs), also fits in 1.005" I.D. phenolic and fiberglass casings.
Propellant may be cut with a hobby knife and drilled by hand or with non-sparking equipment operating at 500 RPM or less. DO NOT use high speed saws or cutters to machine propellant.
Notice: This product is intended for use in a rocket motor configuration of your own design. RCS Rocket Motor Components (RCS), Inc. products are sold "as-is" and no warranty, suitability or fitness for any particular application, either expressed or implied, is made regarding RCS products. Since we cannot control the storage, transportation and use of our products, once sold we cannot assume any responsibility for product storage, transportation or usage. RCS shall not be held responsible for any personal injury or property damage resulting from the handling, storage or use of its products, including any damage to AeroTech or third-party rocket motor hardware. The buyer assumes all risks and liabilities therefrom and accepts and uses RCS products on these conditions. Note: Your state may provide additional rights not covered by this warranty. For use by certified flyers 18 years of age or older.
Updating Order Details
Please do not refresh or navigate away from the page!
Related Products
29mm X 4.016" Long Fibe..
Filament-wound fiberglass casing for 29mm motors. Dimensions: 1.125" O.D. 1.005" I.D. 4.016" long Both ends grooved for bonding .19" long Color: Black Weight: 26 grams
$6.99
29mm X 5.79" Long Fiber..
Filament-wound fiberglass casing for 29mm motors. Dimensions: 1.125" O.D. 1.005" I.D. 5.79" long Both ends grooved for bonding .19" long Color: Black Weight: 37 grams
$10.99
29mm X 8.000" Long Fibe..
Filament-wound fiberglass casing for 29mm motors. Dimensions: 1.125" O.D. 1.005" I.D. 8.000" long Both ends machined 1.037" I.D. for bonding .25" long Color: Black Weight: 54 grams
$12.99
29mm X 12.000" Long Fib..
Filament-wound fiberglass casing for 29mm motors. Dimensions: 1.125" O.D. 1.005" I.D. 12.000" long Both ends grooved for bonding .25" long Color: Black Weight: 82 grams
$15.99
29mm 3-Grain Single-Use..
This kit includes all parts needed to construct a 29mm diameter 3-grain high power single use motor using your own epoxy, propellant and delay grains: 29mm O.D. fiberglass case 8.00" long P/N 01975M-7 Molded nozzle w/0.180" throat P/N 01500 Aft o-ring P/N 00020 Grain spacer o-rings (2) P/N 00020 Forward baffle disk P/N 05402-1 Molded bulkhead P/N 01917-1...
$16.99
29mm 4-Grain Single-Use..
This kit includes all parts needed to construct a 29mm diameter 4-grain high power single use motor using your own epoxy, propellant and delay grains: 29mm O.D. fiberglass case 12.00" long P/N 01975M-8 Molded nozzle w/0.291" throat P/N 01550 Aft o-ring P/N 00020 Grain spacer o-rings (3) P/N 00020 Forward baffle disk P/N 05402-1 Molded bulkhead P/N 01917-1...
$19.99
Phenolic Motor Casing, ..
Convolute-wound paper/phenolic casing for 29mm motors. Dimensions: 1.130" O.D. 1.005" I.D. 48" long
$31.90
Customer Reviews
No Reviews Posted Yet - be the first!(write review)