29mm Super Thunder™ (H13ST) Propellant Grain- Plastic Tube
Product Code: RCS-03STC29-1
29mm Super Thunder™ (H13ST) Propellant Grain- Plastic Tube Summary
Super Thunder™ (H13ST/H14ST version) propellant vacuum mixed and cast into P/N 03165 plastic tubing with the following specifications:
O.D.: 0.933"
I.D.: 0.887"
Length: 7.089"
Drilled partial core 0.44" diameter x 0.38" deep
Net propellant weight: 116.4g
Click here for a full-size propellant data sheet.
May be used with RCS 29mm high power Experimental Motor Kits™ (EMKs) such as P/N EMK29SUEBHP, also fits P/N 02045-8 liner.
Propellant may be cut with a hobby knife and drilled by hand or with non-sparking equipment operating at 500 RPM or less. DO NOT use high-speed saws or cutters to machine propellant. Be aware that Super Thunder propellant may be more friction and impact sensitive than other formulations!
Notice: This product is intended for use in a rocket motor configuration of your own design. RCS Rocket Motor Components (RCS), Inc. products are sold "as-is" and no warranty, suitability or fitness for any particular application, either expressed or implied, is made regarding RCS products. Since we cannot control the storage, transportation, and use of our products, once sold we cannot assume any responsibility for product storage, transportation or usage. RCS shall not be held responsible for any personal injury or property damage resulting from the handling, storage or use of its products, including any damage to AeroTech or third-party rocket motor hardware. The buyer assumes all risks and liabilities therefrom and accepts and uses RCS products on these conditions. Note: Your state may provide additional rights not covered by this warranty. For use by certified flyers 18 years of age or older.
O.D.: 0.933"
I.D.: 0.887"
Length: 7.089"
Drilled partial core 0.44" diameter x 0.38" deep
Net propellant weight: 116.4g
Click here for a full-size propellant data sheet.
May be used with RCS 29mm high power Experimental Motor Kits™ (EMKs) such as P/N EMK29SUEBHP, also fits P/N 02045-8 liner.
Propellant may be cut with a hobby knife and drilled by hand or with non-sparking equipment operating at 500 RPM or less. DO NOT use high-speed saws or cutters to machine propellant. Be aware that Super Thunder propellant may be more friction and impact sensitive than other formulations!
Notice: This product is intended for use in a rocket motor configuration of your own design. RCS Rocket Motor Components (RCS), Inc. products are sold "as-is" and no warranty, suitability or fitness for any particular application, either expressed or implied, is made regarding RCS products. Since we cannot control the storage, transportation, and use of our products, once sold we cannot assume any responsibility for product storage, transportation or usage. RCS shall not be held responsible for any personal injury or property damage resulting from the handling, storage or use of its products, including any damage to AeroTech or third-party rocket motor hardware. The buyer assumes all risks and liabilities therefrom and accepts and uses RCS products on these conditions. Note: Your state may provide additional rights not covered by this warranty. For use by certified flyers 18 years of age or older.
Updating Order Details
Please do not refresh or navigate away from the page!
Related Products
29/38mm Nozzle, 0.104" ..
Molded glass/phenolic nozzle for 29/38mm diameter motors. Dimensions: 1.000" O.D. 0.104" diameter throat 0.250" diameter exit Weight = 10 grams Click here for drawing
$3.00
Phenolic Motor Liner, 2..
Convolute-wound paper/phenolic liner included in EMK29SUEBHP . Dimensions: 0.997" O.D. 0.937" I.D. 7.089" long
$11.99
29mm X 8.000" Long Fibe..
Filament-wound fiberglass casing for 29mm motors. Dimensions: 1.125" O.D. 1.005" I.D. 8.000" long Both ends machined 1.037" I.D. for bonding .25" long Color: Black Weight: 54 grams
$12.99
29mm Single-Use EMK™ En..
Now updated with thin case, thick liner design. This kit includes all parts needed to construct a 29mm diameter 1-grain high power single-use end-burning motor using your own epoxy and propellant grain: 29mm O.D. thin wall fiberglass case 8.00" long P/N 01975T-7 1.053" O.D. thick wall phenolic liner 7.320" long P/N 02045T-8 Molded nozzle w/0.134" throat...
$34.99
Customer Reviews
No Reviews Posted Yet - be the first!(write review)