54mm 2-Grain Single-Use EMK™ High Power Experimental Motor Kit
Product Code: EMK542GSUHP
54mm 2-Grain Single-Use EMK™ High Power Experimental Motor Kit Summary
This kit includes all parts needed to construct a 54mm diameter 2-grain high power single use motor using your own epoxy, propellant and delay grains:
54mm O.D. thick wall machined fiberglass case 8.589" long P/N 01990M-1
Molded nozzle w/0.291" throat P/N 01550
Nozzle adapter P/N 01919-1
Nozzle adapter o-ring P/N 00032
Nozzle o-ring P/N 00020
Grain spacer o-rings (3) P/N 00031
Molded bulkhead P/N 01919
Forward o-ring P/N 00032
Ejection charge cap P/N 0406-5
Use with 1.800" O.D. propellant casting tube P/N 03179L and 0.933" O.D. delay casting tube P/N 03165L.
Click here for a generic assembly drawing of a completed motor using this EMK.
Notice: This product is intended for use in a rocket motor configuration of your own design. RCS Rocket Motor Components (RCS), Inc. products are sold "as-is" and no warranty, suitability or fitness for any particular application, either expressed or implied, is made regarding RCS products. Since we cannot control the storage, transportation and use of our products, once sold we cannot assume any responsibility for product storage, transportation or usage. RCS shall not be held responsible for any personal injury or property damage resulting from the handling, storage or use of its products, including any damage to AeroTech or third-party rocket motor hardware. The buyer assumes all risks and liabilities therefrom and accepts and uses RCS products on these conditions. Note: Your state may provide additional rights not covered by this warranty. For use by certified flyers 18 years of age or older.
54mm O.D. thick wall machined fiberglass case 8.589" long P/N 01990M-1
Molded nozzle w/0.291" throat P/N 01550
Nozzle adapter P/N 01919-1
Nozzle adapter o-ring P/N 00032
Nozzle o-ring P/N 00020
Grain spacer o-rings (3) P/N 00031
Molded bulkhead P/N 01919
Forward o-ring P/N 00032
Ejection charge cap P/N 0406-5
Use with 1.800" O.D. propellant casting tube P/N 03179L and 0.933" O.D. delay casting tube P/N 03165L.
Click here for a generic assembly drawing of a completed motor using this EMK.
Notice: This product is intended for use in a rocket motor configuration of your own design. RCS Rocket Motor Components (RCS), Inc. products are sold "as-is" and no warranty, suitability or fitness for any particular application, either expressed or implied, is made regarding RCS products. Since we cannot control the storage, transportation and use of our products, once sold we cannot assume any responsibility for product storage, transportation or usage. RCS shall not be held responsible for any personal injury or property damage resulting from the handling, storage or use of its products, including any damage to AeroTech or third-party rocket motor hardware. The buyer assumes all risks and liabilities therefrom and accepts and uses RCS products on these conditions. Note: Your state may provide additional rights not covered by this warranty. For use by certified flyers 18 years of age or older.
Updating Order Details
Please do not refresh or navigate away from the page!
Related Products
29mm Casting Tube, Plas..
Plastic casting tube for 29mm motors. Dimensions: 0.933" O.D. 0.887" I.D. 25.75" long
$2.85
54mm Casting Tube, 1.87..
Paper casting tube for 54mm motors. Dimensions: 1.870" O.D. 1.800" I.D. 24.15" long
$6.99
Customer Reviews
No Reviews Posted Yet - be the first!(write review)