54mm X 8.589" Long Carbon Fiber Casing Thin Wall

Molded ABS forward delay bulkhead that can be bonded inside a 01990-1, 01990-2 or 01990-3 fiberglass casing. Overall length: 2.413" Outer diameter: 1.990" Delay charge well diameter: 0.928" Delay charge well length: 1.500" Weight = 54 grams NOTICE: The DMS rocket motor design, components and accessories are protected domestically and internationally...

Machined ABS plastic adapter that allows a 1" O.D. phenolic nozzle to be bonded inside a 01990-1, 01990-2 or 01990-3 fiberglass casing. Weight = 20 grams

Paper casting tube for 54mm motors. Dimensions: 1.865" O.D. 1.800" I.D. 27.44" long

Molded glass/phenolic "Medusa" multi-throat nozzle for 54mm diameter motors. Dimensions: 1.990" O.D. 0.192" diameter center throat 0.500" diameter center exit 0.125" diameter plugged outer throats x 6 0.375" diameter outer exits x 6 Weight = 45 grams Click here for drawing

Molded glass/phenolic nozzle for 54mm diameter motors. Dimensions: 1.985" O.D. 0.455" diameter throat 1.250" diameter exit Weight = 85 grams Click here for drawing

Molded glass/phenolic nozzle with a smaller throat for 54mm diameter motors. This nozzle was previously used on the AeroTech RMS/Hybrid motor system and was last produced in 2001. Dimensions: 1.985" O.D. 0.313" diameter throat 0.812" diameter exit Weight = 55 grams Click here for drawing

Convolute-wound paper/phenolic liner for 54mm motors. Dimensions: 1.982" O.D. 1.875" I.D. 48" long Weight: 6.4 grams/inch