5 product(s) found for "Thrust Rings"

3D printed plastic thrust ring designed to be bonded to a 24mm O.D. single-use motor casing for motor retention. To use, the nozzle is installed in the casing and epoxy is dispensed into the gap between the nozzle and the case until the level of epoxy rises to just below the end of the case. The thrust ring is then placed over the nozzle and pushed...

3D printed plastic thrust ring designed to be bonded to a 75mm O.D. single-use motor casing for motor retention. To use, the nozzle is installed in the casing and epoxy is dispensed into the gap between the nozzle and the case until the level of epoxy rises to just below the end of the case. The thrust ring is then placed over the nozzle and pushed...

3D printed plastic thrust ring designed to be bonded to a 54mm O.D. single-use motor casing for motor retention. To use, the nozzle is installed in the casing and epoxy is dispensed into the gap between the nozzle and the case until the level of epoxy rises to just below the end of the case. The thrust ring is then placed over the nozzle and pushed...

3D printed plastic thrust ring designed to be bonded to a 38mm O.D. single-use motor casing for motor retention. To use, the nozzle is installed in the casing and epoxy is dispensed into the gap between the nozzle and the case until the level of epoxy rises to just below the end of the case. The thrust ring is then placed over the nozzle and pushed...

3D printed plastic thrust ring designed to be bonded to a 29mm O.D. single-use motor casing for motor retention. To use, the nozzle is installed in the casing and epoxy is dispensed into the gap between the nozzle and the case until the level of epoxy rises to just below the end of the case. The thrust ring is then placed over the nozzle and pushed...