11 product(s) found for "Avionics"

0-1600 psi pressure sensor, with "Buick" style connector and analog output. These sensors take 5V DC in and give an analog voltage out that ranges from 0.5 volts at 0 psi to 4.5 volts at the full scale of 1600 psi. The sensor body is stainless steel, and the input fitting is a male boss threaded 1/8 inch NPT. These sensors are ideal for use in high...

EasyMotor is designed for in-flight characterization of research rocket motors. It records chamber pressure and acceleration to an on-board flash memory chip, the contents of which can be downloaded after flight over USB.

LipoCharger is designed to take power from a micro USB connector and charge a single-cell LiPo battery. There are five switchable charge rates, from 100 to 500mA. The 100mA rate is the best choice for our 120mAh and 160mAh cells, the 400mA rate is ideal for our 400mAh cells, and the 500mA rate is best for our 850mAh and larger cells. Hardware Overview...

A simple, 3D-printed ABS mounting bracket for attaching a TeleBT receiver to an Arrow Yagi antenna.

SMA-BNC connector used for adapting an Arrow antenna output to the TeleBT or TeleDongle receiver.

Arrow II 3E three-element portable hand-held Yagi antenna for 70 cm wavelength, used with Altus Metrum Products. Can be used with the TeleDongle or TeleBT receivers. Minor assembly required.

These are very slim, extremely light weight batteries based on Polymer Lithium Ion chemistry. Each cell outputs a nominal 3.7V at 900mAh. Comes terminated with a standard 2-pin JST connector - 2mm spacing between pins, that plugs directly into the battery connector on Altus Metrum flight computers. These batteries are approximately 0.25x1.2x2.0" (6x30x48mm),...

These are very slim, extremely light weight batteries based on Polymer Lithium Ion chemistry. Each cell outputs a nominal 3.7V at 400mAh. Comes terminated with a standard 2-pin JST connector - 2mm spacing between pins, that plugs directly into the battery connector on Altus Metrum flight computers. These batteries are approximately 0.2x1.0x1.4" (5.5x25x35mm),...

These are very slim, extremely light weight batteries based on Polymer Lithium Ion chemistry. Each cell outputs a nominal 3.7V at 120mAh. Comes terminated with a standard 2-pin JST connector - 2mm spacing between pins, that plugs directly into the battery connector on Altus Metrum flight computers. These batteries are approximately 0.2x0.8x1.0" (5x20x24mm),...

This is a high-end recording dual-deploy altimeter for high power model rocketry with integrated GPS and telemetry link. The features included make TeleMega the ideal choice for complex projects including sustainers on multi-stage projects. In particular, pyro events are configurable and can be based on time and various flight events and status, including...

This is a recording dual-deploy altimeter for high power model rocketry with integrated GPS and telemetry link. For the latest TeleMetrum firmware and related ground station software, please visit the AltOS page on this site. Photos shown are of production version 4.0. Features User View Recording altimeter for model rocketry Supports dual deployment...