38mm Warp-9™ (J33N) Propellant Grain- Plastic Tube

CLEARANCE ITEM

CANCELLED WHEN STOCK IS GONE!

Warp-9™ propellant vacuum mixed and cast into P/N 03169-PETG plastic tubing with the following specifications:

O.D.: 1.247"
I.D.: 1.211"
Length: 12.429"
Drilled partial core 0.625" diameter x 0.500" deep
Net propellant weight: 380.5g

Click here for a full-size propellant data sheet.

Fits 02075 liner.

Propellant may be cut with a hobby knife and drilled by hand or with non-sparking equipment operating at 500 RPM or less. DO NOT use high speed saws or cutters to machine propellant.

Notice: This product is intended for use in a rocket motor configuration of your own design. RCS Rocket Motor Components (RCS), Inc. products are sold "as-is" and no warranty, suitability or fitness for any particular application, either expressed or implied, is made regarding RCS products. Since we cannot control the storage, transportation and use of our products, once sold we cannot assume any responsibility for product storage, transportation or usage. RCS shall not be held responsible for any personal injury or property damage resulting from the handling, storage or use of its products, including any damage to AeroTech or third-party rocket motor hardware. The buyer assumes all risks and liabilities therefrom and accepts and uses RCS products on these conditions. Note: Your state may provide additional rights not covered by this warranty. For use by certified flyers 18 years of age or older.