26 product(s) found for "Propellant Chemicals"

A blend of rotary rounded 400 micron AP w/TCP and ground AP for high solids loading and castability. Designed for slower burning propellant formulations (hazmat charges apply). 20 pound pail. NOTICE: New Restrictions on AP Purchases Due to increased Department of Homeland Security (DHS) concerns, we have placed new restrictions on all Ammonium Perchlorate...

A blend of rotary rounded 400 & 200 micron AP w/TCP and ground AP for high solids loading and castability. Intended for extremely high performance and high solids compositions (hazmat charges apply). 20 pound pail. NOTICE: New Restrictions on AP Purchases Due to increased Department of Homeland Security (DHS) concerns, we have placed new restrictions...

A blend of rotary rounded 200 micron AP w/TCP and ground AP for high solids loading and castability. Intended for medium to fast burning rate propellant compositions (hazmat charges apply). 20 pound pail. NOTICE: New Restrictions on AP Purchases Due to increased Department of Homeland Security (DHS) concerns, we have placed new restrictions on all Ammonium...

Catocene (Bis(ethylferrocenyl)propane) is an aggressive liquid burn rate catalyst, dark brownish-orange in color, which can be used in endburning motors and high burn rate APCP propellant compositions. Typical concentration level is 0.5 - 2.0% of total propellant weight. APCP propellants using Catocene can be formulated to achieve burn rates of 0.8"...

Chromium Oxide is a mild burn rate catalyst with a bright green color that improves the ignitability of APCP propellants. Typical concentration level is 0.5 - 2.0% of propellant weight. 100 gram jar.

RCS low molecular weight Hydroxyl-terminated Polybutadiene (HTPB) resin has an unusually low viscosity as a result of a molecular weight of only 1,300. Its corresponding low equivalent weight naturally allows the use of a higher percentage of isocyanate, which results in a substantially reduced premix viscosity. In addition, lower plasticizer percentages...

Ferrocene (Biscyclopentadienyliron) is an aggressive crystalline solid burn rate catalyst, burnt-orange in color, which can be used in endburning motors and high burn rate APCP propellant compositions. Typical concentration level is 0.1 - 0.5% of total propellant weight. APCP propellants using Ferrocene can be formulated to achieve burn rates of 0.5"...

RCS Hydroxyl-terminated Polybutadiene (HTPB) resin premixed with 0.95% CAO-5 antioxidant and 2.38% HX-752 bonding agent. This premix should be used for propellants that contain 400 micron or larger Ammonium Perchlorate, or whenever maximum propellant strength is desired. HX-752 is unique among the commonly-used bonding agents in that it does not release...

Iron Oxide is a moderate burn rate catalyst with a red color that increases the high pressure burn rate of APCP propellants. Our Iron Oxide is a sub-micron particle size that generates good burn rate enhancement with typical formulations. Typical concentration level is 0.5 - 3.0% of propellant weight. 100 gram jar. Click here for a safety data sheet...

Standard grade rotary rounded 400 micron AP w/TCP (hazmat charges apply). 20 pound pail. NOTICE: New Restrictions on AP Purchases Due to increased Department of Homeland Security (DHS) concerns, we have placed new restrictions on all Ammonium Perchlorate (AP) purchases. Effective immediately, all purchasers of AP must have a Tripoli Rocketry Association...

RCS modified MDI isocyanate is an excellent room temperature curative for HTPB. It provides plenty of pot life and good physical properties. If you've been using PAPI or Isonate 143-L you'll be amazed at the difference! Use at the 12.9% concentration level with HTPB with an OH value of .80 (hydroxyl equivalent weight of 1250) and with a 1:1 NCO :OH...

RCS Hydroxyl-terminated Polybutadiene (HTPB) resin premixed with 0.95% CAO-5 antioxidant and 2.38% HX-752 bonding agent. This premix should be used for propellants that contain 400 micron or larger Ammonium Perchlorate, or whenever maximum propellant strength is desired. HX-752 is unique among the commonly-used bonding agents in that it does not release...

In our opinion, Isodecyl Pelargonate (IDP) is the best plasticizer for HTPB-based binders. Its low density, low viscosity, low vapor pressure and cure retardant properties will give you a noticeable improvement over DOA, DBP or whatever else you've been using. 10-35% of the total binder percentage is the usual concentration. 8 ounce bottle. Click here...

Standard grade rotary rounded 200 micron AP w/TCP (hazmat charges apply). 20 pound pail. NOTICE: New Restrictions on AP Purchases Due to increased Department of Homeland Security (DHS) concerns, we have placed new restrictions on all Ammonium Perchlorate (AP) purchases. Effective immediately, all purchasers of AP must have a Tripoli Rocketry Association...

Ammonium Perchlorate (AP) w/TCP, ground to an optimum size for producing high-solids loading, bi- or tri-modal castable solid rocket propellant using 200 and/or 400 micron AP as the larger particle size weight fraction (hazmat charges apply). 10 pound pail. NOTICE: New Restrictions on AP Purchases Due to increased Department of Homeland Security (DHS)...

RCS low molecular weight Hydroxyl-terminated Polybutadiene (HTPB) resin has an unusually low viscosity as a result of a molecular weight of only 1,300. Its corresponding low equivalent weight naturally allows the use of a higher percentage of isocyanate, which results in a substantially reduced premix viscosity. In addition, lower plasticizer percentages...

In our opinion, Isodecyl Pelargonate (IDP) is the best plasticizer for HTPB-based binders. Its low density, low viscosity, low vapor pressure and cure retardant properties will give you a noticeable improvement over DOA, DBP or whatever else you've been using. 10-35% of the total binder percentage is the usual concentration. 1/2 gallon bottle. Click...

CAO-5 is an excellent antioxidant for HTPB resins, and should be used if your propellant will be not fired for 6 months or more. Use at the 1% level in combination with the polymer (i.e., 1% CAO-5, 99% R-45HTLO). 40 gram jar. Click here for a safety data sheet (SDS) on RCS CAO-5 antioxidant.

RCS modified MDI isocyanate is an excellent room temperature curative for HTPB. It provides plenty of pot life and good physical properties. If you've been using PAPI or Isonate 143-L you'll be amazed at the difference! Use at the 12.9% concentration level with HTPB with an OH value of .80 (hydroxyl equivalent weight of 1250) and with a 1:1 NCO :OH...

RCS Hydroxyl-terminated Polybutadiene (HTPB) resin has a functionality of 2.4 - 2.6, which results in a higher crosslink density than lower functionality HTPB with the better room temperature curatives (like our modified MDI isocyanate), without resorting to other ingredients that can adversely affect the cure chemistry. It also allows you to use higher...