Welcome to the RCS Store

Serving Research, Commercial, Educational
& Government Customers Since 1995

An ISO 9001:2015 and AS9100D Certified Supplier

THE 2025 FLYING SEASON HAS STARTED!!

RCS IS YOUR 2025 BALLS LAUNCH HEADQUARTERS!

NOTICE: RCS will be a major sponsor of the Hamster Dance 14 contest during BALLS 33 at the Black Rock Desert in 2025. Significant prizes will be awarded!

Shipping: Orders are processed in the sequence they are received. Except for longer lead items mentioned in the stock alert below, please allow 2-4 weeks for delivery. MADE TO ORDER ITEMS MAY TAKE LONGER.

NOTICE: DUE TO HEAVY INCREASED DEMAND, LEAD TIME FOR PROPELLANT GRAINS MAY BE UP TO 24 TO 28 WEEKS, OR SHORTER IF POSSIBLE.

ALL SALES ARE FINAL!

Stock alert: None.

RCS News

AMMONIUM PERCHLORATE (AP) UPDATE 10/23/24: RCS is pleased to announce that it has secured an alternate AP source for third party sales, and RCS is once again offering AP for sale in the "Propellant Chemicals" category of the store to qualified individuals, businesses and educational institutions. PLEASE NOTE THAT THIS IS NOT DOMESTICALLY-PRODUCED AMMONIUM PERCHLORATE.

Check out our new division Survival Laser, at https://www.survivallaserusa.com! Survival Laser specializes in the sale of laser safety goggles (suitable for laser cutting and engraving protection), electronic components, host hardware, flashlights, optics, batteries, tools and accessories.

NOTICE: The RCS store accepts international orders for parts and publications only with a $200 minimum order. We cannot ship international orders for chemicals or propellant at this time. International orders containing chemicals or propellant will be canceled and the payment refunded.

3/22/25 38mm Classic™ propellant grain added to the "Classic Propellant Grains" category.

11/18/24 24mm 3D printed thrust ring added to the "Thrust Rings" category.

8/20/24 NARAM-65 AeroTech/Quest Manufacturers' Forum presentation now available for download.

3/21/24 New 54mm Grain Drilling Bushing Set now available in a new "Tooling" category.

1/26/24 NARCON AeroTech/Quest Manufacturers' Forum presentation now available for download!

1/24/24 98mm Warp-9 Propellant grain- 1.38" Core added to the "Warp-9 Propellant Grains" category.

12/13/23 75mm x 35.64" Long Fiberglass Casing added to "75mm Fiberglass Casings" category.

12/11/23 38mm Propellant X™ Propellant Grain added to the "Propellant X Propellant Grains" category.

11/2/23 0.562" O.D. Slow Delay & Smoke Grain added to the "Delay and Smoke Grains" category.

10/18/23 New Blue Thunder propellant data sheet now available on the New Blue Thunder propellant grains pages.

10/18/23 Black Max propellant data sheet now available on the Black Max propellant grains pages.

9/5/23 Grain Bonding Motor Matrix posted to the AeroTech Instructions page.

7/24/23 RCS Receives its AS9100D & ISO 9001-2015 Certification. You can view & download the registration certificate here.

7/22/23 98/20480 EMK™ Experimental Motor Kit Large Nozzle has been added to the 98mm High Power RMS EMKs subcategory.

7/17/23 38mm Mojave Green™ propellant grain added to the Mojave Green Propellant Grains category.

6/30/23 Additional parts added to Affordable Model Rocket Motor Components category.

6/28/23 RMS-54/2560 paper inner liner now available.

5/22/23 New 29mm Super Thunder, 38mm Warp-9 and 54mm Warp-9 propellant grains, all in plastic casting tubes for endburning applications, have been added to the store.

4/18/23 P/N 03159-1L 0.798" O.D. 24mm paper casting tube added to the store.

4/18/23 Affordable 18 & 24mm model rocket motor components including new 18 & 24mm single-use EMKs are now available in a new product category.

4/6/23 98mm Redline propellant grain (N3300R version) now available in the "Redline Propellant Grains" subcategory.

3/17/23 Updated AeroTech Master Motor Matrix posted in the AeroTech Resources page.

2/28/23 RCS Low Molecular Weight Hydroxyl-Terminated Polybutadiene Resin is back in stock after an extended period of unavailability.

2/22/23 29mm thick wall cut phenolic liner P/N 02045T-8 to fit 29mm thin fiberglass casing P/N 01975T-7 added to 29mm Cut Phenolic Liners category.

2/10/23 The P/N 01378L 54mm paper casting tube has been lengthened to 24.15" and is now P/N 03179L.

2/7/23 75mm 3D printed thrust ring for single-use motors available in the "Thrust Rings" category.

12/7/22 Prices reduced on all AP and AP blends.

12/1/22 SUPER LOKI MOTOR ASSEMBLIES NOW ON SALE ! ALSO, FOR A LIMITED TIME AND WHILE SUPPLIES LAST, ALL SUPER LOKI ROCKET MOTOR ASSEMBLY ORDERS WILL INCLUDE A LOKI DART (A $500 VALUE) AT NO EXTRA CHARGE! THIS IS A COMBINED $2,000 VALUE!

11/3/22 Altus Metrum EasyMotor v3 and 1600 psi pressure sensor added to the store.

10/26/22 AeroTech packaging tape added to the store.

8/24/22 54mm 3D printed tailcone for the ISP12-500 nozzle extension added to the store.

8/23/22 Enerjet Collectible Components category and products added to the store.

8/1/22 75mm Propellant X™ grain (K1103X/L1940X version) now available in the "Propellant X Propellant Grains" subcategory.

6/30/22 98mm Propellant X™ grain (O5280X zero-plasticizer version and dimensions) now available in the "Propellant X Propellant Grains" subcategory.

5/3/22 Several new propellant grains added in the "Propellant Grains" category.

4/25/22 ONEBADHAWK line of recovery harnesses and recovery hardware added to the store.

4/20/22 54mm Tail Cone Aft Closure added to the "Rocket Motor Hardware" category.

3/28/22 Altus Metrum EasyMega added to the "Avionics" category.

12/13/21 New "AeroTech Resources" page added.

11/13/21 LipoCharger v2 added to the "Avionics" category.

10/20/21 Altus Metrum EasyMini , Arrow Antenna 3E Yagi, SMA-BNC Connector and TeleBT Mounting Bracket added to the "Avionics" category.

10/14/21 New Large Throat 38mm Nozzle added to the "Single-Throat Nozzles" category.

10/12/21 Fine ground Ammonium Perchlorate (AP) oxidizer suitable for producing high-solids loading castable solid rocket propellant using 200 and/or 400 micron AP as the larger particle size weight fraction is now available under the "Propellant Chemicals" category.

9/8/21 29mm (1.000" O.D.) Blue Thunder™ propellant grain, 29mm (.995" O.D.) New Blue Thunder™ propellant grain, 38mm Metalstorm DM™ propellant grain and a 38mm DMS™ Baffle Disk have been added to the store.

8/17/21 Printed and bound copies of three additional technical reports by Chuck Piper on ALCLO, BKNO3 and MTV ignition compositions are now available under the "Equipment, Books, Other Products" category.

8/13/21 Printed and bound copies of Gary Rosenfield's NAR, TRA and NFPA technical presentations over the past few years are now available under the "Equipment, Books, Other Products" category.

7/14/21 54mm ISP12-500 nozzle with 0.192" throat is available on the store.

7/9/21 75mm Metalstorm DM™ propellant grain now available.

2/27/21 The 38mm 01600 phenolic nozzle is back in stock!

1/12/21 75 & 98mm Slow White Lightning™ propellant grains added to the "Propellant Grains' category.

12/30/20 Altus Metrum line of rocket avionics and related products added to the "Avionics" category.

11/24/20 38 & 54mm diameter Black Max™ grains added to the Black Max Propellant Grains page.

10/27/20 8221™ (E6 propellant) 24mm propellant grain available.

10/15/20 29mm DMS-style threaded forward bulkhead added to store.

10/13/20 54mm filament-wound carbon fiber motor casings are now available in limited quantity on the store.

10/12/20 Assembly drawings for all AeroTech DMS rocket motors have been uploaded to the RCS store "Motor Designs" page. Many of these designs can be reproduced by Tripoli L2 or higher certified members using currently available RCS propellant and motor components. Additional propellants and components will be added as time permits. NOTE: Assembly drawings for AeroTech RMS™ motors can be found here. NOTICE: The DMS™ rocket motor design, components and accessories are protected domestically and internationally under U.S. patent numbers 9,416,753, 10,066,918, 10,690,467 and 10,746,133. A royalty-free license is hereby granted to customers who purchase DMS components and accessories from RCS for the purpose of building motors for their personal use. For licensing for commercial use, please email RCS at customerservice@aerotech-rocketry.com or call at 435-865-7100.

9/24/20 New 38mm plastic casting tube to fit the RCS-02075 thick 38mm phenolic liner added to the store.

9/22/20 Water-slide and self adhesive multiple logo decal sheets available.

9/11/20 The 54mm Aerospike Nozzle is now available on the store.

7/14/20 New 75mm single throat nozzle available.

6/11/20 Several new items have been added to the RCS store:
38mm plastic casting tube
54mm plastic casting tube
29mm thick wall phenolic liner
29mm x 5.79" long thin wall fiberglass casing
29mm x 8.00" long thin wall fiberglass casing
29mm x 9.06" long thin wall fiberglass casing
29mm x 12.00" long thin wall fiberglass casing
38mm x 7.98" long thin wall fiberglass casing
38mm x 14.03" long thin wall fiberglass casing
54mm x 14.10" long thin wall fiberglass casing
54mm Warp-9™ propellant grain cast in plastic tube

5/13/20 LINER SALE! The 75mm 1-grain and 98mm 1 and 2-grain cut phenolic liners are on sale at a big discount!

4/15/20 54/852 and 54/1280 RMS EMKs with the 0.313" diameter single throat nozzle now available.

4/3/20 54mm Aerospike nozzle announced, availability in September.

3/26/20 New 54mm single-throat nozzle with a 0.313" diameter throat, 29mm liner and 29mm casting tube now available.

Payment

RCS uses PayPal which is a trusted and secure payment method. You do not need to have a PayPal account to use PayPal.

PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

ALL SALES ARE FINAL!

PLEASE READ THIS NOTICE:

RCS Rocket Motor Components (RCS), Inc. products are sold "as-is" and no warranty, suitability or fitness for any particular application, either expressed or implied, is made regarding RCS products. Since we cannot control the storage, transportation and use of our products, once sold we cannot assume any responsibility for product storage, transportation or usage. RCS shall not be held responsible for any personal injury or property damage resulting from the handling, storage or use of our products. The buyer assumes all risks and liabilities therefrom and accepts and uses RCS products on these conditions. Note: Your state may provide additional rights not covered by this warranty.

I, the buyer, have read the notice above and agree to its terms. I assume all risk and liability of RCS products once purchased. I understand that the manufacture of rocket motors and rocket propellant may be an inherently dangerous activity. I have or I will read Terry McCreary's book "Experimental Composite Propellant" prior to using RCS products and will follow the safety procedures prescribed therein. I agree to conduct my rocket activities in compliance with all applicable laws and regulations to the best of my ability.